Pelletization is one of our powder processing technologies. For compounding, mica powder is very difficult to feed in
the extruder and causes low workability because the powder flies apart due to the small bulk in specific gravity.

Our original product 'MICALET' solves all the problem as it is pelletized. 'MICALET' means Mica Pellet.
'MICALET' breaks down to primary particles and disperses uniformly by kneading and stirring. process.

We can also pelletize various products, such as mica, talc and sericite, or their powder mixtures.
Please contact us if you have any request.

Appearrance of MICALET 21PU

Comparison of the output rate of MICALET(21PU)& Powder(A-21)

Product Name Base Powder Bulk
Loss on
Type, Content
of Binder
A-21B A-21S 0.7 0.5 3 No Binder
21PU A-21S 0.7 0.5 3 Urethane, 0.8%
21P5(330) A-21S 0.7 0.5 3 No Binder  Aminosilane (1%)
J31PU J-31M 0.7 0.4 3 Urethane, 0.8%  Under development
25PI AB-25S 0.7 0.4 3 Inorganic, 0.5%  Under development

*The values above are representative values and not for use as specification.

Different kind of powders can be mixed using our surface treatment or pelletizing equipment.In mixing, the process of stirring
and kneading are performed by batch processing, and
uniformly dispersed mixed powder can be produced.

Also, this equipment enables us to do surface-treatment and pelletization at the same time, so we can supply custom-made
powder upon your request.

With our mixed powder, you will save time to procure, measure and put into equipment of each powder.

Copyright 2018 by YAMAGUCHI MICA CO., LTD. All rights reserved.